More engines back in service

Over the past week, I was able to make some nice progress in train-land.

Northern Pacific Quirk

I tried running the NP 0-6-0 on a track by itself. Upon startup, the whistle began sounding non-stop automatically. Pushing the whistle or bell buttons on the transformer would not resolve this. I looked up solutions on the Internet, and after a few trials, I found a fix. MTH locomotives running Proto-Sounds 2.0 or 3.0 should not be the only thing on a track drawing power. Add a lighted car to the track (or wire an accessory that uses a lightbulb to the track), and the extra power usage somehow resolves the issue. So, all is well with the 0-6-0.

Southern Railroad Surprise

I opened up the SR F3 A unit to repair it, but found that it was working properly. Previously, it seemed like the rear motor was frozen up, putting a lot of pressure on the front motor. I checked the connections and confirmed that both motors were spinning merrily along, so I closed up the engine and deemed it ready for service. This #2356 locomotive is at least 60 years old.

Rock Island Return

I opened up the RI 4-8-4, and confirmed that the motor drive is not staying in contact with the main gear (slipping). I experimented with different motor angles and came up with a good one using some scrap pieces of cork. The cork worked well temporarily, but needed to be replaced with something safer and more permanent. The next day, I picked up some rubber erasers and cut them to fit the locomotive. The locomotive tested well with the new rubber spacers, so I re-affixed the shell.

I also got out more trains for the new roster and inventoried them.

Fancy new blue rubber spacers under the Rock Island 4-8-4 motor

This Northern is back in action. It is currently the 2nd-largest locomotive in the fleet.

RI 4-8-4 ready for service