Mark's MT Railroads: MPC Diesels and Front Range Curves

Welcome back to rail-land ~

This was a fruitful week in the Train Room. I also did some more planning for future expansion. And, I’ve detailed some more of my train adventures from our trip to Denver last month.

In the Train Room, I used the voltmeter to measure the ohm resistance in the speaker on the NP 0-6-0. The measurement showed approximately 16 ohms, which is exactly what a healthy speaker should show. According to MTH’s ProtoSounds 2.0 troubleshooting guide, either the chip needs to be reprogrammed, or the board needs to be replaced! Bleh! I emailed the MTH Customer Service team to see if they could provide any other insight.

To begin prepping for the Christmas season, I’ve put away the current projects, and will take them out again next year. So, the NP 0-6-0 and Electroliner were reassembled and stored safely in their boxes, and the rest of the roster was stored as well (The Bozeman Zephyr, CSS Interurbans, the NP freight train, and the UP Postwar train). While storing the Postwar searchlight car, the light housing fell and cracked. Thankfully, this was already a replacement housing, and more replacements are readily available. I’ve added this to the Engine House spreadsheet. As I put these trains away, I also inventoried them in the spreadsheet.

On Sunday, I got out all of the trains for the Nov/Dec roster. I also did some general straightening of the room, and changed all of the calendars to November. On Monday, I set up Track 1 with the MKT NW2 leading 4 CNW ore (grain) cars and an MKT caboose. The MKT engine is the first diesel locomotive we had on our train set when I was a kid. My father bought it at the Brass Whistle train store in Rockford, IL. For many years, this was the "ol' reliable" engine for moving freight. I also moved the portable fireplace, and in its place stacked 3 tubs of trains. On Tuesday I did some rearranging under the train table, to place frequently accessed tubs on top of infrequently accessed ones. I also set up Track 2 with the CNW Trainmaster pulling 5 reefers (MRR, GN, CNW, Dairy Men’s, NP) and a CNW caboose. I also lubricated the MKT NW2 and CNW Trainmaster. Both of these diesels were manufactured by “Lionel” during the 1970-1986 “MPC” era. MPC (Model Products Corporation) was a subsidiary of General Mills, and owned the Lionel rights during this time. These engines are 35-40 years old, and after some lubricating, they are running very well! As I set up these trains, I also inventoried them in the spreadsheet.

I also had fun planning out some options for the train building of the future. After dealing with a lot of boxing and unboxing trains recently, I’d like to one day have all of the trains on display or running on the layout. This means that I have to plan for sufficient wall/shelving space in the new building, so I did some preliminary calculating and wall-layout planning.

So, back to my Denver train-doings… On the Thursday of our trip, after dropping my bride off at training for the day, I drove north of Golden on Highway 93, and turned left towards the mountains on Highway 72. After two miles, I turned into a residential area on Blue Mountain Drive. This road took me to the top of a foothill, and I had views facing east towards Denver. I parked along the side of the road, and walked over to the edge of the hill. I was able to tracks below me, which traveled through a variety of curves. I arrived just in time to photograph and film a BNSF EB mixed freight coming down the mountains and entering the curves. Like the BNSF trains that travel through Billings, this one had engines on the front end and a few more at the back. It took it about 10 minutes to navigate the wandering track path, and I was able to view it the whole time. A few moments after the BNSF cleared, a waiting UP WB mixed freight powered up and began climbing the hill. The UP was headed by 5 locomotives, and had 1 helper locomotive located in the middle of the train. I watched the train wrap around itself as it continued up the hill. While watching the trains, a local resident came by as she was walking her dogs. She didn’t seem too surprised to see a railfan here, and she provided some interesting information about the curve the trains were traveling through below. Along the eastern side of the curve, on the west side of the track, a string of hopper cars were buried in the ground and filled with dirt. Trees were planted behind them. The trees and buried cars create a type of snow/wind fence, as this curve is in the direct path of any inclement weather coming off the mountains. The buried cars are somewhat visible from Highway 72. After the UP train went out of sight, I drove down the mountain road and met the train at the crossing. It continued through another curve around Coal Creek Peak while I headed back east. After another hour or two of climbing and curving, the train would arrive at the Moffat Tunnel and traverse the Continental Divide.

Meanwhile, I went back to Golden and drove through the Coors Brewery/Manufacturing plant. I drove through the entire facility and saw many interesting rail operations and equipment used at the beer-producing plant. Coors has their own fleet of locomotives, and a lot of freight cars get shuffled about all day long. There are also semi-frequent BNSF trains making deliveries to the plant. After returning to Lakewood, I visited Jenny’s Junk Emporium, which is a consignment shop that specializes in railroad and model railroad items. They had a lot of railroad artifacts and media, and trains of all scales, including quite a few G-Scale items. The prices were rather restrictive, so I just enjoyed looking. So, this was another fun morning of train-related activities! Next week I’ll conclude with a review of my visit to the Colorado Model Railroad Museum.

My Train goals for the coming week are: setup/inventory/lubricate trains on Tracks 3 & 4, finish reorganizing the tubs under the table, repack the “Train Boxes”, and make sure ALL of the tubs are labeled.

Until then, enjoy some more photos, and keep those rails shiny ~